Feature description
SAMWAY FP175 CRIMPING MACHINE
Feature description：
● Siemens Touch Control
● Designed for Mass Production
● Large Opening up +150mm
● Low Crimping Center 650mm Above Ground
● CE Approved
Specification：
TECHNICAL DATA | |
Max crimping dia (mm/inch) 1) | 320/12.60 |
Max crimping dia with master dies (mm/inch) | 330/13 |
Max. crimping force (KN) | 6600/8600(FP175) |
Max. crimping force (tonnage) | 660 |
Cycle time 10 mm (s) 2) | 3.1 |
Hydraulic hose size (inch) | 10 * |
Industrial hose size (inch) | 12.60 * |
Die set series | 323) / 1603) / 170 |
Max. opening (mm) 4) | +150 |
Max. opening without dies (mm) | 470 |
Master die D/L (mm) | 320/190 |
Master die D/L (inch) | 12.60/8.66 |
Motor Power (KW/HP) | 15/20(400V 3 Phase) |
Oil tank volume | 250 L |
DIMENSIONS (LxWxH) | |
Machine (mm) | 1800x1000x1500 |
Machine (inch) | 70.9x39.4x59.1 |
Packaged (mm) | 1900x1100x1700 |
Packaged (inch) | 74.8x43.3x66.9 |
Hydraulic Unit (mm) | 900x700x1300 |
Hydraulic Unit (inch) | 35.4x27.6x51.2 |
Packaged (mm) | 1045x800x1405 |
Packaged (inch) | 41.1x31.5x55.3 |
WEIGHT | |
Machine (kg/lbs) | 3500/7716 |
Packaged (kg/lbs) | 3800/8378 |
Hydraulic Unit (kg/lbs) | 500/1102 |
Packaged (kg/lbs) | 550/1213 |
1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10 mm cycle.
3) With adapter dies.
4) Maximum opening is the total die travel. Add this value to the minimum
crimping diameter of the die set used. The result is the maximum opening of
the machine with die set in place.
Standard Die Sets Included：
* Optional die sets at additional cost